Spectrophotometric Determination of Fe(II) and Fe(III) Using 5-(4-Ethylphenyl azo ) 2-Hydroxybenzaldehyde Oxime Reagent

Authors

  • mohammad Abdullah Department of Chemistry, College of Education, Salahaddin University-Erbil,Kurdistan Region, Iraq

DOI:

https://doi.org/10.21271/ZJPAS.33.6.3

Keywords:

Iron, spectrophotometry, azo-oxime Ligand

Abstract

      Simple, rapid and sensitive spectrophotometric methods for the determination of trace amounts of iron (II) and iron (III) were developed based on complex formation between 5-(4- Ethylphenyl azo )2-Hydroxybenzaldehyde oxime reagent with iron (II) and iron (III) in acidic medium. The reagent 5-(4-Ethylphenyl azo )2-Hydroxybenzaldehyde oxime has been synthesized and used for iron analysis. The calibration graphs were linear in the concentration range 1.0-6.0 µg/ml and1.0-7.0 µg/ml of iron (II) and iron (III), respectively. The total iron also was determined after reduction of iron (III) to iron (II) employing ascorbic acid solution. The effects of foreign ions and species on the determination of Fe (II) and Fe (III) were investigated to assess the selectivity of the methods. The proposed methods were successfully applied for iron determination in pure form and in pharmaceutical preparation. Good agreement was obtained between the results of the proposed methods and by the reference method.

 

References

 

ABDEL-AZEEM, S., BADER, N., KUSS, H. & EL-SHAHAT, M. 2013. Determination of total iron in food samples after flow injection preconcentration on polyurethane foam functionalized with N, N-bis (salicylidene)-1, 3-propanediamine. Food chemistry, 138, 1641-1647.

ABOU EL-REASH, Y. G., TANTAWY, H. A., ABDEL-LATIF, E. & MORTADA, W. I. 2020. Micelle-mediated extraction for speciation and spectrophotometric determination of iron using a newly synthesized salicylic acid derivative. Microchemical Journal, 158, 105280.

AOUN, I. K. A. & H KHAFAGY, A. 2018. Preparation, characterization and biological study of new azo-oxime ligand and some of its metal complexes. مجلة الكوفة للكيمياء| Kufa Journal for Chemistry, 2.

AZZOUZ, A. & AGHA, A. O. 2008. The Influence of Temperature, pH and the Type of Oxime Isomer on the Stability Constant Values of Some Azo Dyes Formations Between Oximes and the Diazotized Sulfanilic Acid Salt. Iraqi National Journal Of Chemistry.

BALCERZAK, M., TYBURSKA, A. & SWIĘCICKA-FÜCHSEL, E. 2008. Selective determination of Fe (III) in Fe (II) samples by UV-spectrophotometry with the aid of quercetin and morin. Acta pharmaceutica, 58, 327-334.

BLAIN, S. & TREGUER, P. 1995. Ironn (II) and iron (III) determination in sea water at the nanomolar level with selective on-line preconcentration and spectrophotometric determination. Analytica Chimica Acta, 308, 425-432.

CHENG, F., ZHANG, T., SUN, T., WANG, Y., ZHOU, C., ZHU, H. & LI, Y. 2021. A simple, sensitive and selective spectrophotometric method for determining iron in water samples. Microchemical Journal, 165, 106154.

DERUN, E. M., KIPCAK, A., OZDEMIR, O. D. & PISKIN, M. 2012. Cr, Fe and Se Contents of the Turkish Black and Green Teas and the Effect of Lemon Addition. International Journal of Nutrition and Food Engineering, 6, 1018-1022.

DIDUKH-SHADRINA, S. L., LOSEV, V. N., SAMOILO, A., TROFIMCHUK, A. К. & NESTERENKO, P. N. 2019. Determination of metals in natural waters by inductively coupled plasma optical emission spectroscopy after preconcentration on silica sequentially coated with layers of polyhexamethylene guanidinium and sulphonated nitrosonaphthols. International journal of analytical chemistry, 2019.

DOBRINAS, S., SOCEANU, A. D., STANCIU, G. & BRATU, S. 2011. Essential elements levels in herbs and their infusions. Ovidius University Annals of Chemistry, 22, 37-40.

DONNICI, C. L., SOUZA, C. C., BEINNER, M. A. & SILVA, J. B. B. D. 2016. Fast determination of iron and zinc in hair and human serum samples after alkaline solubilization by GF AAS. Journal of the Brazilian Chemical Society, 27, 119-126.

DURUKAN, İ., ŞAHIN, Ç. A., ŞATıROĞLU, N. & BEKTAŞ, S. 2011. Determination of iron and copper in food samples by flow injection cloud point extraction flame atomic absorption spectrometry. Microchemical Journal, 99, 159-163.

ENSAFI, A. A., CHAMJANGALI, M. A. & MANSOUR, H. R. 2004. Sequential determination of iron (II) and iron (III) in pharmaceutical by flow-injection analysis with spectrophotometric detection. Analytical Sciences, 20, 645-650.

FRANKOWSKI, M. 2012. Simultaneous determination of aluminium, aluminium fluoride complexes and iron in groundwater samples by new HPLC–UVVIS method. Microchemical Journal, 101, 80-86.

GHOSH, G. C., KHAN, M. J. H., CHAKRABORTY, T. K., ZAMAN, S., KABIR, A. E. & TANAKA, H. 2020. Human health risk assessment of elevated and variable iron and manganese intake with arsenic-safe groundwater in Jashore, Bangladesh. Scientific reports, 10, 1-9.

GÓMEZ-NIETO, B., GISMERA, M. J., SEVILLA, M. T. & PROCOPIO, J. R. 2015. Fast sequential multi-element determination of major and minor elements in environmental samples and drinking waters by high-resolution continuum source flame atomic absorption spectrometry. Analytica chimica acta, 854, 13-19.

GONDIM, T. A., GUEDES, J. A., RIBEIRO, L. P., LOPES, G. S. & MATOS, W. O. 2017. Optimization of a cloud point extraction procedure with response surface methodology for the quantification of dissolved iron in produced water from the petroleum industry using FAAS. Marine pollution bulletin, 114, 786-791.

HARRIS, D. C. 2010. Quantitative chemical analysis, Macmillan.

HASSLER, C. S., LEGIRET, F.-E. & BUTLER, E. C. 2013. Measurement of iron chemical speciation in seawater at 4° C: The use of competitive ligand exchange–adsorptive cathodic stripping voltammetry. Marine Chemistry, 149, 63-73.

JHA, A., MANN, R. & BALACHANDRAN, R. 1996. Tea-A Refreshing Beverage. Indian Food Industry, 15, 22-29.

KAASALAINEN, H., STEFÁNSSON, A. & DRUSCHEL, G. K. 2016. Determination of Fe (II), Fe (III) and Fetotal in thermal water by ion chromatography spectrophotometry (IC-Vis). International Journal of Environmental Analytical Chemistry, 96, 1074-1090.

KARABÖRK, M., KIRPIK, H., SAYIN, K. & KÖSE, M. 2019. New diazo-containing phenolic oximes: structural characterization, computational studies, and solvent extraction of Cu (II), Ni (II), and Zn (II) ions. Turkish Journal of Chemistry, 43, 197-212.

KASA, N. A. & BAKıRDERE, E. G. 2021. Determination of Iron in Licorice Samples by Slotted Quartz Tube Flame Atomic Absorption Spectrometry (FAAS) with Matrix Matching Calibration Strategy after Complexation with Schiff Base Ligand-Based Dispersive Liquid–Liquid Microextraction. Analytical Letters, 54, 1284-1294.

KHALED, E., HASSAN, H. & MOGHIEB, A. 2007. Flow Injection Spectrophotmetric Determination of Iron Based on Its Catalytic Effect on the Oxidation of Variamine Blue by Hydrogen Peroxide Original Paper. Journal of Flow Injection Analysis, 24, 109.

KORONKIEWICZ, S. 2021. Photometric Determination of Iron in Pharmaceutical Formulations Using Double-Beam Direct Injection Flow Detector. Molecules, 26, 4498.

LAUR, N., KAISER, L., DEIGNER, H.-P. & KINSCHERF, R. 2021. Sequential Analysis of Trace Elements in a Micro Volume Urine Sample Using Inductively Coupled Plasma Mass Spectrometry. Applied Sciences, 11, 3740.

MORTADA, W. 2021. Preconcentration and spectrophotometric determination of Fe (III) by cloud point extraction using Zincon as complexing agent. Egyptian Journal of Chemistry, 64, 5-9.

NURCHI, V. M., CAPPAI, R., SPANO, N. & SANNA, G. 2021. A Friendly Complexing Agent for Spectrophotometric Determination of Total Iron. Molecules, 26, 3071.

PROCH, J. & NIEDZIELSKI, P. 2021. Iron species determination by high performance liquid chromatography with plasma based optical emission detectors: HPLC–MIP OES and HPLC–ICP OES. Talanta, 231, 122403.

SAEIDI, M., ABOUTALEBI, R. & DAREHKORDI, A. 2013. A new spectrophotometric reagent for Fe (III): 2-(2, 3-dihydroxy-4-oxocyclobut-2-enylidene) hydrozinecarbothiamide and its application in real samples. Journal of Chemistry, 2013.

SHARIFF, R., AACHARY, A. A., PACQUETTE, L. H., MITTAL, A. K. & GIRDHAR, R. 2018. Analytical method validation and determination of iron and phosphorus in vegetable oil by inductively coupled plasma–mass spectrometry with microwave assisted digestion. Analytical Letters, 51, 1774-1788.

SHRIVASTAVA, A. & GUPTA, V. B. 2011. Methods for the determination of limit of detection and limit of quantitation of the analytical methods. Chronicles of young scientists, 2, 21-25.

TOTAN, M., ANTONESCU, E. & GLIGOR, F. G. 2018. Quantitative spectrophotometric determinations of Fe3+ in Iron Polymaltose solution. Indian Journal of Pharmaceutical Sciences, 80, 268-273.

WĘGIEL, K., ROBAK, J. & BAŚ, B. 2017. Voltammetric determination of iron with catalytic system at a bismuth bulk annular band electrode electrochemically activated. RSC advances, 7, 22027-22033.

XUE, D.-S., CHEN, G.-J., SU, B.-X., LIU, Y.-H., ZHANG, D.-P., GUO, Q., GUO, J.-J. & SUN, J.-F. 2020. On-line spectrophotometric determination of ferrous and total iron in monominerals by flow injection combined with a Schlenk line-based digestion apparatus to exclude oxygen. Microchemical Journal, 155, 104743.

ZANNAT, T. & AHMED, M. J. 2014. A simple and rapid spectrophotometric method for the determination of iron in environmental, biological, pharmaceutical, food and soil samples using 1, 2-dihydroxybenzene-3, 5-disulfonic acid. European Journal of Chemistry, 5, 101-110.

Published

2022-01-03 — Updated on 2022-01-04

How to Cite

Abdullah, mohammad. (2022). Spectrophotometric Determination of Fe(II) and Fe(III) Using 5-(4-Ethylphenyl azo ) 2-Hydroxybenzaldehyde Oxime Reagent. Zanco Journal of Pure and Applied Sciences, 33(6), 21–29. https://doi.org/10.21271/ZJPAS.33.6.3

Issue

Section

Biology, Chemistry and Medical Researches