Controlling ZnO Nanorods Morphology by Seeded Layer Assisted Chemical Vapor Deposition

Mithaq  Ali Salih; Yasir   Hussein Mohammed

doi:10.21271/ZJPAS.37.6.3

Authors

Mithaq Ali Salih Department of Physics, College of Education for Pure Science, University of Mosul, 41002 Mosul, Iraq.
Yasir Hussein Mohammed Department of Physics, College of Education for Pure Science, University of Mosul, 41002 Mosul, Iraq. https://orcid.org/0000-0003-3388-7704

DOI:

https://doi.org/10.21271/ZJPAS.37.6.3

Keywords:

CVD; ZnO-TFs; ZnO NRs; optical characteristics; morphological analysis

Abstract

Vertically aligned zinc oxide (ZnO) nanorods (NRs) were grown using a seeded layer-assisted chemical vapor deposition technique. This study examined the impact of altered evaporation crucible-substrate spacing (3, 4, 5, and 6 cm) on the optical behavior, morphological characteristics, and elemental composition of ZnO thin films prepared as a seed layer (buffer layer). Besides, the surface morphology and structural characteristics of the synthesized ZnO NRs was evaluated in the presence and absence of the seed layer. Seed layer samples were evaluated by an ultraviolet-visible spectrophotometer, a field emission scanning electron microscope (FESEM), and energy-dispersive X-ray (EDX) spectroscopy. In contrast, the NRs samples were characterized using FESEM and X-ray diffraction (XRD) technique. The optical energy gap results showed a blue shift from 3.23 eV to 3.28 eV as the separation spacing increased from 3 cm to 6 cm, respectively. FESEM images revealed that the separation spacing strongly influences the morphology of the ZnO films. EDX analysis of the seed layer disclosed the presence of prominent peaks for zinc and oxygen, which confirmed the elemental composition of the grown samples. Furthermore, ZnO NRs synthesized in the absence of a seed layer were observed to be shorter, misaligned, exhibit random growth rates, and possess inferior quality compared to those synthesized with a seed layer. XRD analysis confirmed the high crystalline quality of the grown nanorod samples. Our systematic technique for the synthesis and characterization of the seed layer could play a significant role in the production of superior nanorod arrays.

References

Jilani, A., Abdel-Wahab, M. S., and Hammad, A. H. (2017). Advance deposition techniques for thin film and coating. Modern technologies for creating the thin-film systems and coatings. 2(3), 137-149.

Płóciennik, P., Zawadzka, A., Frankowski, R., and Korcala, A. Selected methods of thin films deposition and their applications. 2016 18th International Conference on Transparent Optical Networks (ICTON): IEEE. 2016. 1-4.

Tu, K.-N. (2010). Electronic Thin-Film Reliability. Cambridge: Cambridge University Press.

Mohammed, Y. H., Sakrani, S. B., and Rohani, M. S. (2015). Improved structural features of Au-catalyzed silicon nanoneedles. Superlattices and Microstructures. 85(0), 849-858.

Rosli, A. B., Herman, S. H., Nordin, N. H., Mohd Sauki, N. S. a., Shariffudin, S., and Rusop Mahmood, M. (2014). Effect of seed layer morphology on the growth of zinc oxide nanotetrapods by thermal chemical vapour deposition method. Advanced Materials Research. 832, 429-433.

Saeed, Z. M., Mohammed, Y. H., and Ahmad, S. M. (2024). Atmospheric Pressure Chemical Vapor Deposition Grown One-Dimensional ZnO Nanostructures. Physics of the Solid State. 66(7), 201-213.

Ahmad, I. A., and Mohammed, Y. H. (2023). Synthesis of ZnO nanowires by thermal chemical vapor deposition technique: Role of oxygen flow rate. Micro and Nanostructures. 181, 207628.

Sakrani, S., Jamaludin, N., Muhammad, R., Wahab, Y., Ismail, A. K., Suhaimi, S., and Mohammed, Y. H. (2016). Effect of gas flow rate on structural properties of zinc oxide nanowires grown by vapor-solid mechanism. AIP Conference Proceedings. 1733(1), 020040.

Chala, S., Sengouga, N., Yakuphanoğlu, F., Rahmane, S., Bdirina, M., and Karteri, İ. (2018). Extraction of ZnO thin film parameters for modeling a ZnO/Si solar cell. Energy. 164, 871-880.

Arya, S. K., Saha, S., Ramirez-Vick, J. E., Gupta, V., Bhansali, S., and Singh, S. P. (2012). Recent advances in ZnO nanostructures and thin films for biosensor applications. Analytica chimica acta. 737, 1-21.

Lee, P.-C., Hsiao, Y.-L., Dutta, J., Wang, R.-C., Tseng, S.-W., and Liu, C.-P. (2021). Development of porous ZnO thin films for enhancing piezoelectric nanogenerators and force sensors. Nano Energy. 82, 105702.

Sandeep, K., Bhat, S., and Dharmaprakash, S. (2017). Structural, optical, and LED characteristics of ZnO and Al doped ZnO thin films. Journal of Physics and Chemistry of Solids. 104, 36-44.

Shewale, P., and Yu, Y. (2017). UV photodetection properties of pulsed laser deposited Cu-doped ZnO thin film. Ceramics International. 43(5), 4175-4182.

Selim, M. S., Yang, H., Wang, F. Q., Fatthallah, N. A., Huang, Y., and Kuga, S. (2019). Silicone/ZnO nanorod composite coating as a marine antifouling surface. Applied Surface Science. 466, 40-50.

Shaida Anwar, K., Kurda, A. H., and Yousif Mawlood, H. (2024). Photodetector Devices: Investigation of ZnO Thin Films Fabricated via SILAR Technique on Various Substrates. Zanco Journal of Pure and Applied Sciences. 36(4), 24-32.

Park, D. J., Kim, D. C., Lee, J. Y., and Cho, H. K. (2006). Synthesis and microstructural characterization of growth direction controlled ZnOnanorods using a buffer layer. Nanotechnology. 17(20), 5238.

Banari, M., and Memarian, N. (2021). Effect of the seed layer on the UV photodetection properties of ZnO nanorods. Materials Science and Engineering: B. 272, 115332.

Paul, S., Das, A., Palit, M., Bhunia, S., Karmakar, A., and Chattopadhyay, S. (2016). Investigation of the properties of single-step and double-step grown ZnO nanowires using chemical bath deposition technique. Adv. Mater. Lett. 7, 610-615.

Ji, L.-W., Peng, S.-M., Wu, J.-S., Shih, W.-S., Wu, C.-Z., and Tang, I.-T. (2009). Effect of seed layer on the growth of well-aligned ZnO nanowires. Journal of Physics and Chemistry of Solids. 70(10), 1359-1362.

Yin, Y. T., Que, W. X., and Kam, C. H. (2010). ZnO nanorods on ZnO seed layer derived by sol–gel process. Journal of Sol-Gel Science and

Azmi, Z. H., Mohd Aris, S. N., Abubakar, S., Sagadevan, S., Siburian, R., and Paiman, S. (2022). Effect of seed layer on the growth of zinc oxide nanowires by chemical bath deposition method. Coatings. 12(4), 474.

Mohammed, Y. H., Sakrani, S. B., and Rohani, M. S. (2016). VHF-PECVD grown silicon nanoneedles: Role of substrate temperature. Superlattices and Microstructures. 91, 173-181.

Mohammed, Y. H. (2019). Fabrication of n-MgZnO/p-Si heterojunction diode: Role of magnesium doping. Superlattices and Microstructures. 131, 104-116.

Eckertová, L. (1977). Physics of Thin Films. New York: Springer US.

Soylu, M., and Savas, O. (2015). Electrical and optical properties of ZnO/Si heterojunctions as a function of the Mg dopant content. Materials Science in Semiconductor Processing. 29(Supplement C), 76-82.

Shinde, S. S., Shinde, P. S., Sapkal, R. T., Oh, Y. W., Haranath, D., Bhosale, C. H., and Rajpure, K. Y. (2012). Photoelectrocatalytic degradation of oxalic acid by spray deposited nanocrystalline zinc oxide thin films. Journal of Alloys and Compounds. 538, 237-243.

Singh, S. K., and Hazra, P. (2018). Performance analysis of undoped and Mg-doped ZnO/p-Si heterojunction diodes grown by sol–gel technique. Journal of Materials Science: Materials in Electronics. 29(6), 5213-5223.

Yahya, N. (2011). Carbon and Oxide Nanostructures: Synthesis, Characterisation and Applications. New York: Springer Berlin Heidelberg.

Kasap, S., and Capper, P. (2006). Springer Handbook of Electronic and Photonic Materials. NewYork: Springer.

Mortezaali, A., Taheri, O., and Hosseini, Z. S. (2016). Thickness effect of nanostructured ZnO thin films prepared by spray method on structural, morphological and optical properties. Microelectronic Engineering. 151, 19-23.

Mamat, M. H., Malek, M. F., Hafizah, N. N., Asiah, M. N., Suriani, A. B., Mohamed, A., Nafarizal, N., Ahmad, M. K., and Rusop, M. (2016). Effect of oxygen flow rate on the ultraviolet sensing properties of zinc oxide nanocolumn arrays grown by radio frequency magnetron sputtering. Ceramics International. 42(3), 4107-4119.

Guillén, C., and Herrero, J. (2010). Optical, electrical and structural characteristics of Al:ZnO thin films with various thicknesses deposited by DC sputtering at room temperature and annealed in air or vacuum. Vacuum. 84(7), 924-929.

Song, J., and Lim, S. (2007). Effect of seed layer on the growth of ZnO nanorods. The Journal of Physical Chemistry C. 111(2), 596-600.

Ghazali, M. N. I., Izmi, M. A., Mustaffa, S. N. A., Abubakar, S., Husham, M., Sagadevan, S., and Paiman, S. (2021). A comparative approach on One-Dimensional ZnO nanowires for morphological and structural properties. Journal of Crystal Growth. 558, 125997.

Mohammed, Y. H., Sakrani, S. B., and Rohani, M. S. (2016). Pressure dependent tailored attributes of silicon nanoneedles grown by VHF plasma technique. Superlattices and Microstructures. 94, 147-157.

Mohammed, Y. H., Sakrani, S. B., and Rohani, M. S. (2016). Tunable morphological evolution of in situ gold catalysts mediated silicon nanoneedles. Materials Science in Semiconductor Processing. 50, 36-42.

Vasile, E., Plugaru, R., Mihaiu, S., and Toader, A. (2011). Study of microstructure and elemental micro-composition of ZnO: Al thin films by scanning and high resolution transmission electron microscopy and energy dispersive X-ray spectroscopy. Romanian Journal of Information Science and Technology. 14(4), 346-355.